High Angular Resolution Stellar Imaging with Occultations from the Cassini Spacecraft II: Kronocyclic Tomography

We present an advance in the use of Cassini observations of stellar occultations by the rings of Saturn for stellar studies. Stewart et al. (2013) demonstrated the potential use of such observations for measuring stellar angular diameters. Here, we use these same observations, and tomographic imaging reconstruction techniques, to produce two dimensional images of complex stellar systems. We detail the determination of the basic observational reference frame. A technique for recovering model-independent brightness profiles for data from each occulting edge is discussed, along with the tomographic combination of these profiles to build an image of the source star. Finally we demonstrate the technique with recovered images of the {\alpha} Centauri binary system and the circumstellar environment of the evolved late-type giant star, Mira.Comment: 8 pages, 8 figures, Accepted by MNRA

Improving Accuracy of Structural Dynamic Modification with Augmented Residual Vectors

It is often important to perform sensitivity analysis to determine how a structural model will be impacted by design changes. Often, the structural analysts will manually make changes to the finite element model (FEM) to determine the effects. But when dealing with a large FEM with millions of degrees of freedom these manual changes can be cumbersome and calculation of the effects can computationally expensive. Therefore, it is desirable to determine the effects of model changes through approximation methods. One common technique is to determine the analytical sensitivity of the FEM model with respect to the given change. These analytical sensitivities are valid when small changes are made to the structural model, but invalid if large changes need to be assessed. Another approach is to use Structural Dynamic Modification (SDM) to create a surrogate model to analyze model changes. SDM is a widely-used sensitivity method and is used in applications of model updating, uncertainty quantification, and model design studies. SMD is valid for moderate (10-20 percent) changes in the structural model, but model approximations are often needed for large parameter changes (greater than 20 percent). Structural Dynamic Modification can be improved by using residual vectors to augment the surrogate model formulation from SDM. Adding the residual modes increases the fidelity of the surrogate model while keeping the computational cost low. This paper discusses the application and limitations of the augmented residual modes method to two structures: the Integrated Spacecraft and Payload Element (ISPE) of the Space Launch System (SLS) and the full SLS as it is configured during its Integrated Modal Test (IMT)

High-performance 3D waveguide architecture for astronomical pupil-remapping interferometry

The detection and characterisation of extra-solar planets is a major theme driving modern astronomy, with the vast majority of such measurements being achieved by Doppler radial-velocity and transit observations. Another technique -- direct imaging -- can access a parameter space that complements these methods, and paves the way for future technologies capable of detailed characterization of exoplanetary atmospheres and surfaces. However achieving the required levels of performance with direct imaging, particularly from ground-based telescopes which must contend with the Earth's turbulent atmosphere, requires considerable sophistication in the instrument and detection strategy. Here we demonstrate a new generation of photonic pupil-remapping devices which build upon the interferometric framework developed for the {\it Dragonfly} instrument: a high contrast waveguide-based device which recovers robust complex visibility observables. New generation Dragonfly devices overcome problems caused by interference from unguided light and low throughput, promising unprecedented on-sky performance. Closure phase measurement scatter of only $\sim 0.2^\circ$ has been achieved, with waveguide throughputs of $> 70\%$. This translates to a maximum contrast-ratio sensitivity (between the host star and its orbiting planet) at $1 \lambda/D$ (1$\sigma$ detection) of $5.3 \times 10^{-4}$ (when a conventional adaptive-optics (AO) system is used) or $1.8 \times 10^{-4}$ (for typical `extreme-AO' performance), improving even further when random error is minimised by averaging over multiple exposures. This is an order of magnitude beyond conventional pupil-segmenting interferometry techniques (such as aperture masking), allowing a previously inaccessible part of the star to planet contrast-separation parameter space to be explored

Carbon turnover in the water-soluble protein of the adult human lens.

PurposeHuman eye lenses contain cells that persist from embryonic development. These unique, highly specialized fiber cells located at the core (nucleus) of the lens undergo pseudo-apoptosis to become devoid of cell nuclei and most organelles. Ostensibly lacking in protein transcriptional capabilities, it is currently believed that these nuclear fiber cells owe their extreme longevity to the perseverance of highly stable and densely packed crystallin proteins. Maintaining the structural and functional integrity of lenticular proteins is necessary to sustain cellular transparency and proper vision, yet the means by which the lens actually copes with a lifetime of oxidative stress, seemingly without any capacity for protein turnover and repair, is not completely understood. Although many years of research have been predicated upon the assumption that there is no protein turnover or renewal in nuclear fiber cells, we investigated whether or not different protein fractions possess protein of different ages by using the (14)C bomb pulse.MethodsAdult human lenses were concentrically dissected by gently removing the cell layers in water or shaving to the nucleus with a curved micrometer-controlled blade. The cells were lysed, and the proteins were separated into water-soluble and water-insoluble fractions. The small molecules were removed using 3 kDa spin filters. The (14)C/C was measured in paired protein fractions by accelerator mass spectrometry, and an average age for the material within the sample was assigned using the (14)C bomb pulse.ResultsThe water-insoluble fractions possessed (14)C/C ratios consistent with the age of the cells. In all cases, the water-soluble fractions contained carbon that was younger than the paired water-insoluble fraction.ConclusionsAs the first direct evidence of carbon turnover in protein from adult human nuclear fiber cells, this discovery supports the emerging view of the lens nucleus as a dynamic system capable of maintaining homeostasis in part due to intricate protein transport mechanisms and possibly protein repair. This finding implies that the lens plays an active role in the aversion of age-related nuclear (ARN) cataract

Child Adult Relationship Enhancement in Primary Care (PriCARE): Study design/protocol for a randomized trial of a primary care-based group parenting intervention to prevent child maltreatment

BACKGROUND: Child maltreatment (CM) is a pervasive public health problem and there is a critical need for brief, effective, scalable prevention programs. Problematic parent-child relationships lie at the heart of CM. Parents who maltreat their children are more likely to have punitive parenting styles characterized by high rates of negative interaction and ineffective discipline strategies with over-reliance on punishment. Thus, parenting interventions that strengthen parent-child relationships, teach positive discipline techniques, decrease harsh parenting, and decrease child behavioral problems hold promise as CM prevention strategies. Challenges in engaging parents, particularly low-income and minority parents, and a lack of knowledge regarding effective implementation strategies, however, have greatly limited the reach and impact of parenting interventions. Child Adult Relationship Enhancement in Primary Care (PriCARE)/Criando Niños con CARIÑO is a 6-session group parenting intervention that holds promise in addressing these challenges because PriCARE/CARIÑO was (1) developed and iteratively adapted with input from racially and ethnically diverse families, including low-income families and (2) designed specifically for implementation in primary care with inclusion of strategies to align with usual care workflow to increase uptake and retention. METHODS: This study is a multicenter randomized controlled trial with two parallel arms. Children, 2-6 years old with Medicaid/CHIP/no insurance, and their English- and Spanish-speaking caregivers recruited from pediatric primary care clinics in Philadelphia and North Carolina will be enrolled. Caregivers assigned to the intervention regimen will attend PriCARE/CARIÑO and receive usual care. Caregivers assigned to the control regimen will receive usual care only. The primary outcome is occurrence of an investigation for CM by child protective services during the 48 months following completion of the intervention. In addition, scores for CM risk, child behavior problems, harsh and neglectful parenting behaviors, caregiver stress, and caregiver-child interactions will be assessed as secondary outcome measures and for investigation of possible mechanisms of intervention-induced change. We will also identify PriCARE/CARIÑO implementation factors that may be barriers and facilitators to intervention referrals, enrollment, and attendance. DISCUSSION: By evaluating proximal outcomes in addition to the distal outcome of CM, this study, the largest CM prevention trial with individual randomization, will help elucidate mechanisms of change and advance the science of CM prevention. This study will also gather critical information on factors influencing successful implementation and how to optimize intervention referrals, enrollment, and attendance to inform future dissemination and practical applications. TRIAL REGISTRATION: This trial was registered on ClinicalTrials.gov (NCT05233150) on February 1, 2022, prior to enrolling subjects

Numerical investigation of the effect of rolling on the localized stress and strain induction for wire + arc additive manufactured structures

Cold rolling can be used in-process or post-process to improve microstructure, mechanical properties and residual stress in directed-energy-deposition techniques, such as the high deposition rate wire + arc additive manufacturing (WAAM) process. Finite element simulations of the rolling process are employed to investigate the effect of rolling parameters, in particular rolling load and roller profile radius on the residual stress field as well as plastic strain distribution for the profiled roller. The results show the response to rolling of commonly used structural metals in WAAM, i.e., AA2319, S335JR steel and Ti-6Al-4V, taking into account the presence of residual stresses. The rolling load leads to changes in the location and the maximum value of the compressive residual stresses, as well as the depth of the compressive residual stresses. However, the roller profile radius only changes the maximum value of these compressive residual stresses. Changing the rolling load influences the equivalent plastic strain close to the top surface of the wall as well as in deeper areas, whereas the influence of the roller profile radius is negligible. The plastic strain distribution is virtually unaffected by the initial residual stresses prior to rolling. Finally, design curves were generated from the simulations for different materials, suggesting ideal rolling load and roller profile combinations for microstructural improvement requiring certain plastic strains at a specific depth of the additive structure

Patient Characteristics Influence Revision Rate of Total Hip Arthroplasty:American Society of Anesthesiologists Score and Body Mass Index Were the Strongest Predictors for Short-Term Revision After Primary Total Hip Arthroplasty

Background: Outcome and survival after primary total hip arthroplasty (THA) can be affected by patient characteristics. We examined the effect of case-mix on revision after primary THA using the Dutch Arthroplasty Register. Methods: Our cohort included all primary THAs (n = 218,214) performed in patients with osteoarthritis in the Netherlands between 2007 and 2018. Multivariable logistic regression analysis was used to calculate the difference in survivorship in patients with different patient characteristics (age, gender, American Society of Anesthesiologists [ASA] score, body mass index [BMI], Charnley score, smoking, and previous operations to the hip). Results: Case-mix factors associated with an increased risk for revision 1 year after THA were the following: a high ASA score (II and III-IV) (odds ratio [OR] 1.5, 95% confidence interval [CI] 1.1-2.0 and OR 3.0, 95% CI 1.7-5.3), a higher BMI (30-40 and >40) (OR 1.4, 95% CI 1.2-1.5 and OR 2.0, 95% CI 1.4-1.7), age ≥75 years (OR 1.5, 95% CI 1.1-2.0), and male gender (OR 1.3, 95% CI 1.2-1.4). A similar model for 3-year revision showed comparable results. High BMI (OR 1.9, 95% CI 1.3-2.9), a previous hip operation (OR 1.8, 95% CI 1.3-2.5), ASA III-IV (OR 1.2, 95% CI 1-1.6), and Charnley score C (OR 1.5, 95% CI 1.1-2.2) were associated with increased risk for revision. Main reasons for revision in obese and ASA II-IV patients were infection, dislocation, and periprosthetic fracture. Patients with femoral neck fracture and late post-traumatic pathology were more likely to be revised within 3 years, compared to osteoarthritis patients (OR 1.5, 95% CI 1.3-1.7 and OR 1.5, 95% CI 1.2-1.7). Conclusion: The short-term risk for revision after primary THA is influenced by case-mix factors. ASA score and BMI (especially >40) were the strongest predictors for 1-year revision after primary THA. After 3 years, BMI and previous hip surgery were independent risk factors for revision. This will help surgeons to identify and counsel high-risk patients and take appropriate preventive measures

Francisella tularensis subsp. novicida isolated from a human in Arizona

<p>Abstract</p> <p>Background</p> <p><it>Francisella tularensis </it>is the etiologic agent of tularemia and is classified as a select agent by the Centers for Disease Control and Prevention. Currently four known subspecies of <it>F. tularensis </it>that differ in virulence and geographical distribution are recognized:<it>tularensis </it>(type A), <it>holarctica </it>(type B), <it>mediasiatica</it>, and <it>novicida</it>. Because of the Select Agent status and differences in virulence and geographical location, the molecular analysis of any clinical case of tularemia is of particular interest. We analyzed an unusual <it>Francisella </it>clinical isolate from a human infection in Arizona using multiple DNA-based approaches.</p> <p>Findings</p> <p>We report that the isolate is <it>F. tularensis </it>subsp. <it>novicida</it>, a subspecies that is rarely isolated.</p> <p>Conclusion</p> <p>The rarity of this <it>novicida </it>subspecies in clinical settings makes each case study important for our understanding of its role in disease and its genetic relationship with other <it>F. tularensis </it>subspecies.</p

Pharmacists in Pharmacovigilance: Can Increased Diagnostic Opportunity in Community Settings Translate to Better Vigilance?

The pharmacy profession has undergone substantial change over the last two to three decades. Whilst medicine supply still remains a central function, pharmacist’s roles and responsibilities have become more clinic and patient focused. In the community (primary care), pharmacists have become important providers of healthcare as Western healthcare policy advocates patient self-care. This has resulted in pharmacists taking on greater responsibility in managing minor illness and the delivery of public health interventions. These roles require pharmacists to more fully use their clinical skills, and often involve diagnosis and therapeutic management. Community pharmacists are now, more than ever before, in a position to identify, record and report medication safety incidents. However, current research suggests that diagnostic ability of community pharmacists is questionable and they infrequently report to local or national schemes. The aim of this paper is to highlight current practice and suggest ways in which community pharmacy can more fully contribute to patient safety